Jones and Bartlett Fire Inspector Principles and Practice Practice Exam

These questions are part of the practice quiz. Start practicing

• What element is essential for combustion to occur?
• Which of the following is a primary characteristic of thermoplastic materials?
• What is an ionization smoke detector designed to do?
• What is characterized by lightweight structural supports for roofs or floors?
• What initiates combustion in a material due to sufficient internal heat caused by a chemical reaction?
• What is the purpose of a final or construction inspection form?
• What is the minimum amount of gaseous fuel required for a mixture to be flammable or explosive?
• What is the name for walls that extend above the roofline on a flat roof?
• Which type of wall is designed to provide structural support for a building?
• What distinguishes Type 4 construction from the other types?
• What is the process of heat transfer through direct contact called?
• What does a zoned coded alarm system indicate?
• According to NFPA 520, which type of contents is described as likely to burn with extreme rapidity?
• What type of construction has structural members made of noncombustible materials and specified fire resistance?
• What is T tapping in the context of fire alarm systems?
• Conditional approval is typically granted for what reason?
• What is a key feature of Type 5 construction?
• What defines a nonbearing wall?
• Which type of construction is the most common in contemporary buildings?
• What type of smoke detection device uses a narrow beam of light?
• What is the term for a beam used in construction?
• What does self inspection refer to in a fire safety context?
• What is a wall designed to support only the weight of itself called?
• Which phase of fire development is limited to the immediate point of origin?
• Which type of glass is manufactured with a thin vinyl core covered by glass on each side?
• What term describes an area that has been cleared or modified to reduce the risk of fire spreading from improved property to wildland fuels?
• What is the term for the way heat transfers to other objects?
• What is the primary characteristic of Type 3 construction?
• What do you call pieces of wood that are glued together?
• What term describes a condition where all combustibles in a space ignite simultaneously?
• Who is classified as a Fire Inspector 1?
• Which wall is constructed on the line between two properties?
• What is the term for the minimum temperature at which a fuel will ignite and continue to burn?
• Fires involving combustible cooking media such as vegetable fats are known as?
• Which type of fire alarm system includes a public alarm box system to notify the fire department?
• Which of the following describes an immediate life safety issue that demands prompt action?
• Which individual would primarily interact with the public regarding fire safety programs?
• What are the upper and lower concentration limits at a specified temperature and pressure of a flammable gas?
• Which class of fire involves combustible metals such as magnesium and sodium?
• Which term describes contents that are so low in combustibility that self-propagating fires cannot occur?
• What device is used to accelerate the removal of air from a dry-pipe or preaction sprinkler system?
• What is the responsibility of an off-premises facility in the context of fire alarms?
• What construction type is defined as having all structural components made of wood?
• What is the minimum temperature at which a liquid or solid releases sufficient vapor to form an ignitable mixture with air?
• What is the typical type of truss used to support a sloping roof?
• What is a line detector used for in a fire alarm system?
• What describes a nongaseous substance that moves and flows freely, assuming the shape of its container?
• What term describes joists mounted in an inclined position to support a roof?
• What does a Fire Marshall enforce?
• What type of device notifies occupants of an alarm condition in a fire alarm system?
• Under which circumstances would a reinspection be necessary?
• Which type of building construction generally does not exceed four floors?
• Which type of fire alarm system transmits a signal to the fire department?
• What is the purpose of a reinspection?
• Small pieces of wood or wood and metal assembled together to form structural elements are known as?
• What does high piled storage refer to in safety regulations?
• What is defined as any finely divided solid material that presents a fire or explosion hazard when ignited in air?
• What do as-built diagrams represent?
• What phenomenon explains the stratification of heat layers that occurs in a room due to fire?
• What is a built-up unit of construction made from materials such as brick or clay tiles set in mortar called?
• What class of fire involves energized electrical equipment?
• What does the role of a Fire Inspector primarily involve?
• What defines a zoned system in fire alarms?
• What describes a roof with sloping or inclined surfaces?
• What term refers to all combustible materials that sustain a fire?
• Which term refers to the physical substance made up of atoms and molecules?
• In fire dynamics, which phase involves the fire reaching its maximum intensity?
• What is the main characteristic of a pitched chord truss?
• What is the primary function of a photoelectric smoke detector?
• Which inspection is often required when a contractor lacks clearance to perform work?
• What type of energy is produced by electricity?
• What is the primary difference in the roles of Fire Inspector 1 and Fire Inspector 2?
• What is produced during oxidation reactions?
• What type of glass is significantly stronger and harder to break than ordinary glass?
• What is the maximum amount of gaseous fuel present in an air mixture for it to be flammable called?
• What is the first phase of fire development called?
• Type 2 construction is commonly used for which type of building?
• What term describes a document that contains only mandatory provisions indicated by the word "Shall"?
• Which construction method uses thin sheets of wood glued together?
• What is a performance-based code?
• What is the term for legislation that allows a local jurisdiction to adopt specific codes?
• Which method of heat transfer involves circulation within a medium, such as a gas or liquid?
• What term describes the cylindrical area above a fire where heated air and gases rise?
• What is the role of a Fire and Life Safety Education Specialist?
• What type of material cannot be softened or reshaped after curing?
• What type of inspection occurs when a business requests permission to open?
• What distinguishes a Fire Inspector 2 from a Fire Inspector 1?
• Which of the following is not a phase of fire development?
• What is a master coded alarm system designed to do?
• Which phase of matter is described as a substance that has three dimensions and is firm in substance?
• What type of contents burns with moderate speed and produces a significant amount of smoke?
• Which type of smoke detector is known for its light-source detection method?
• What phase comes immediately after the incipient phase in fire development?
• What is the primary role of a central station in a fire alarm system?
• Which type of standpipe system is specifically designed for use by fire department personnel only?
• What type of device captures air samples and analyzes them for smoke or gas detection?
• What type of system indicates which zone was activated on the panel?
• What type of glass is designed to be stronger and can be formed into larger sheets but shatters upon impact?
• Which of the following is NOT a class of fire?
• A noncoded alarm system is characterized by what feature?
• What safety characteristic is essential in Type 1 construction?
• Which type of alarm system is categorized by audible notification that can indicate the area of an alarm?
• What does a Fire Protective Engineer do?
• What property describes how quickly a material will conduct heat?
• What is an important factor in a rapid fire development?
• Noncombustible construction is typically found in which of the following?
• Fires involving flammable and combustible liquids are classified as what?
• What do annual inspections typically assess within the building?
• What is the purpose of an inspection performed as part of the regular inspection cycle?
• Which component in a fire alarm system emits sound or visual warnings to alert occupants?
• How long can a Type 3 structure burn?
• What are windows that project inward or outward on an upper hinge, commonly found in older buildings called?
• What occurs when hot gases rise and cooler air is drawn in to replace them, contributing to combustion?
• Which of the following best defines high hazard contents?
• What is defined as a rapid, persistent chemical reaction that releases both heat and light?
• What process involves the destructive distillation of organic compounds in an oxygen-free environment to convert them into gases, liquids, and char?
• What is a characteristic of laminated wood?
• What condition can lead to both fire and explosion hazards?
• Which construction type involves heavy timber with noncombustible exterior walls?
• What is a key attribute of the remote supervising station system?
• What is primarily evaluated during a fire inspection?
• What term describes the energy created by the combination or decomposition of chemical compounds?
• Which term describes a substance that expands indefinitely and takes the shape of its container?
• What document is used to detail complaints lodged with the fire inspection agency?
• Which type of construction is commonly found in the context of high life safety hazards?
• Which type of truss has parallel top and bottom chords?
• In the context of heat transfer, what method involves the emission of heat through electromagnetic waves?
• What is the main disadvantage of a noncoded alarm system?
• Which type of construction is known for using wood frame as its main component?
• What kind of beam is supported at two points near its ends, with no additional support for overloads?
• Which fire class would you use for a fire involving burning oils and fats?
• What describes a roof with surfaces that are not horizontal?
• What does a prescriptive code define?
• What are load-bearing members made from individual wood components called?
• What is the phase of fire development where the fire is free-burning and consuming much of the fuel?
• What condition occurs when unburned products of combustion accumulate in the ceiling layer to ignition concentration?
• What is the nature of ordinary hazard contents as regulated by fire codes?
• Which standpipe combines features of both Class 1 and Class 2 standpipe systems?
• Which alarm feature allows you to monitor sensitive areas within a facility?
• What is the function of laminated glass in construction?
• What does an alarm matrix chart show in a fire alarm system?
• Where is a remote annunciator typically located?
• What type of construction is characterized by exterior walls made of noncombustible materials and interior floors and walls made of combustible materials?
• What do we call reactions that result in the release of energy in the form of heat?
• Which of the following best describes a "joist" in construction?
• What is a collection of lightweight structural components joined in a triangular configuration called?
• What function does a beam detector serve in fire detection?
• What type of energy is created by friction?
• What type of explosion occurs when a tank containing a volatile liquid is heated?
• What is described as an airborne particulate product of incomplete combustion?
• What term refers to the weight of the building contents?
• What triggers a complaint inspection?
• What term refers to a state of inadequate oxygenation of the blood and tissue?
• Which form of construction utilizes a top and bottom plate that acts as a firestop?
• Who has demonstrated the necessary skills to conduct and complete fire investigations?
• Which type of alarm system is usually utilized for low-risk areas only?
• Which part of a doorway is responsible for securing the door to the studs in a building?
• Which class of fire involves ordinary combustibles?
• Which type of fire alarm system is designed to identify the area where an alarm originated?
• What is the function of an alarm initiation device in a fire alarm system?
• What is the term for the chipping or pitting of concrete or masonry surfaces?
• Which term describes reactions that absorb heat or require heat to be added?
• What describes the weight of an airborne concentration vapor or gas compared to an equal volume of dry air?
• Which process involves the emission, transmission, and absorption of energy traveling by electromagnetic waves?
• What is the phase of fire development in which the fire spreads beyond its point of origin?
• What kind of inspections include checking systems like sprinklers and fire alarms during construction?
• What type of construction uses materials that do not sustain combustion?
• What is the lowest temperature at which a substance releases enough vapors to ignite?
• What is the primary purpose of a fire inspection?
• What is a characteristic of Class D fires?
• Which component of smoke can significantly reduce visibility and is a major concern in firefighting operations?
• What is the term used for the column of hot gases, flames, and smoke that rises above a fire?
• What phase of fire development occurs when the fire has consumed most available fuel or oxygen and begins to die down?
• What mechanism does a bimetallic strip use to activate an alarm?
• Which structural term refers to a wall that does not bear any load except its own weight?
• What type of standpipe system is generally equipped with a length of 1 1/2 inch hose for building occupants?
• What happens when a bimetallic strip reaches a certain temperature?
• What describes a dry sprinkler system that requires activation of a secondary device before the pipes fill with water?
• Which term describes glass that is molded with tempered glass and a special wire mesh?
• What is a common responsibility of a Fire Marshall?
• Which construction technique builds the frame of a structure one floor at a time, with firestop features?
• What is the function of dunnage in transportation?
• What is the main feature of a solid core door?
• Which type of door construction includes wood filler pieces for added strength and may be fire-rated?
• What does a spot detector do?
• What is the effect called when hot air and smoke collect near the ceiling of a room?
• What phenomenon occurs during a backdraft?
• What type of wall is used to subdivide spaces within any story of a building?
• In fire dynamics, what is the key mechanism that allows heat to be conducted through materials?
• Which of the following phases occurs after the ignition phase and before the fully developed phase?
• Which construction type is the highest degree of safety?
• What is created when a flammable gas mixture reaches its upper explosive limit?
• Which phenomenon occurs when there is too much oxygen in blood tissues?
• In a fire, what does the fuel refer to?
• What is the purpose of a permit issued by the authority having jurisdiction?
• Buildings with noncombustible materials that lack fire resistance are classified as what type of construction?
• Which type of construction is comprised of noncombustible materials for all structural members and requires at least 2 hours of fire resistance?
• Which material can be repeatedly softened by heating and hardened by cooling?
• Which type of construction is designed for higher fire resistance?
• What is a stop work order issued for?
• What is a defining characteristic of Type 2 construction?
• What does the term "dead load" refer to?